Tag: Electrical equipment
-
The Effects of Low Power Factor on Electrical Equipment
The cosine of the angle between voltage and current in an AC circuit is referred to as the power factor. In a typical AC circuit, there is a phase difference Φ between the voltage and current. The term cos Φ is termed to as the power factor of the circuit; if the current is inductive,…
-
Switchgear Terminology & IEC Standards
Switchgear generally refers to the switching devices and their combinations, with the related control, measuring, protective and regulating equipment. The switchgear equipment basic purpose is switching and interrupting currents either under normal or abnormal operating conditions. Modern power systems, power lines and other apparatus operate at high voltages and carry large currents. When a short…
-
SF6 Circuit Breakers: Features, Operation & Applications
Introduction Many modern designs of circuit breakers for use at transmission voltages utilize sulphur hexafluoride (SF6) gas both as an arc-interrupting/arc-quenching and a dielectric medium. At distribution voltages SF6 designs of circuit breakers are also used, however vacuum and bulk-oil circuit breakers still find a wide use as alternatives. The SF6 is an electron-negative gas…
-
5 Causes of High-Voltage Switchgear Failures
Switchgear is basically equipment used switch ON or OFF generators, transmission lines, distributors and other equipment under both normal and abnormal conditions. Switchgear consists of switching and protecting devices such as switches, fuses, circuit breakers, relays, and so forth. In other words switchgear can be defined as equipment used for switching, controlling and protecting the…
-
Switchgear Equipment
Switchgear can be defined as equipment used for controlling, regulating and switching ON and OFF power circuits. Switchgear units range from the small moulded-case unit circuit breakers in a household panel board to the huge, air break switches on 750 kV transmission lines. Switchgear equipment is generally divided into four groups, namely: Disconnect/Isolator Switches Disconnect…