Tag: Differential Pressure Transmitters
-
Installation Considerations of an Orifice Plate Flow Sensor
If a constriction is placed in a pipe as shown in figure 1 below, the flow must be higher through the restriction to maintain mass flow at all points. Since the mass flow must be equal at all points, the flow velocity must increase in the region of A2. As there is no net gain…
-
How to Perform Mass flow Measurements with DP sensors
Let’s assume we are measuring flow by differential-creating primary device for example an orifice plate and a DP cell as illustrated in Figure 1 below: The differential head across the primary device is corrected for temperature variation in the first calculation block, but there is no need for pressure correction because a liquid is virtually…
-
How to Connect a DP (Differential Pressure) Flow Sensor to a DP Transmitter
The DP Transmitter should be mounted with a manifold block as illustrated in the figure 1(a) below to allow for maintenance. Valves B and C are the isolation valves while valve A is an equalizing valve. Valve A is used along with valves B and C to zero the transmitter. In normal operation valve A…