A radio frequency (RF) signal generator is used in generating high frequency signals at a specific frequency for testing laboratories. The output frequency may range for example from about 100 kHz to around 40 GHz. A typical RG generator consists of: RF oscillator, amplifier, output level meter and a calibrated attenuator.
Contents
Components of RF Generator
RF Oscillator
This oscillator includes a continuous frequency control and a frequency range switch, to set the output to any desired frequency.
The oscillator circuit that is used in RF generator is normally either a Colpitts or Hartley oscillator.
Amplifier
The amplifier has an output amplitude control. This allows the voltage applied to the attenuator to be set to a calibration point on the output level meter.
Output Level Meter
The output level must always be reset to the calibration point each time the frequency is changed. This is done at the output level meter.
Calibrated Attenuator
The calibrated attenuator displays the correct voltage level (set to a calibration point on the output level meter) from the amplifier.
Recommended: The Ultimate Guide to Electrical Maintenance
Common Features RF Generators
Many RF generators have features for amplitude modulation (AM) and frequency modulation (FM) of the output. Switches are provided on the front panel to allow the user to select no modulation in addition to internal or external AM or FM modulation.
Every section of the RF generator is shielded by enclosing it in a metal box. The whole system is then completely shielded. This shielding is necessary to prevent:
- RF interference between the components.
- Emission of RF energy from any point with the exception of output terminals. In fact, even the power line is decoupled by means of RF chokes and capacitors to prevent RF emission from it.
Applications of RF Generators
RF signal generators are commonly used in radar and communication, research and development labs, education and training, electromagnetic interference (EMI) testing and material testing. Their major uses include:
- Used to perform tests on radio transmitters and receivers.
- Used to test the amplitude and frequency response of RF amplifiers during the design phase.
Related articles:
- RF Power and Voltage Measurement
- RF Scalar and Vector Network Analyzers
- Components that make up a RF Communication System
- Radio Frequency (RF) and Microwave Spectral Analysis
- Radio Frequency Spectrum Analyser
- Radio Frequency (RF) and Microwave – Multiple Choice Questions & Answers (MCQ3)
- Gamma Spectroscopy Measurement Technique
Comments
2 responses to “Radio Frequency (RF) Signal Generator – Features & Applications”
[…] Radio Frequency (RF) Signal Generator – Features & Applications […]
[…] Radio Frequency (RF) Signal Generator – Features & Applications […]