Category: Industrial Communication Networks
-
Key Facts about RS-485 Industrial Network
RS-485 network is used in many industrial applications to gather data and control addressable motor drives, PLCs, cameras, time clocks, barcode scanners for process control and other factory automatic apparatus. RS-485 devices can be connected to a computer … Read more
-
ZigBee Wireless Protocol for Industrial Communication
ZigBee is an open wireless standard for low-rate networks. It is an IEEE standard 802.15.4 protocol. The physical layer radio operates at 2.4 GHz band carrier frequencies with direct sequence spread spectrum (DSSS). It supports a range of up to … Read more
-
How Modbus is used in Industrial Networks
Modbus is an open standardized communication protocol that was founded by Modicon. Initially it was designed for the communication among PLCs in industrial applications but it also gained significance use in building automation domain for instance in HVAC systems, DDCs … Read more
-
Features of a Serial Interface
In a serial interface, the data is sent 1 bit after the other on a single wire. Serial data is classified as being either synchronous or asynchronous. Synchronous data require that the data bytes be sent as group in a … Read more
-
Basic Features of Sercos Automation Bus
Sercos is a short form for serial real-time communication system; a digital automation bus that interconnects motion controls, drives, I/O, sensors, and auxiliary devices such as cameras and weighing stations. Sercos is an open controller-to-intelligent digital device … Read more
-
Advantages of Industrial Control Networks
Industrial networks have evolved to become an integral part of manufacturing replacing the point-to-point communication at all levels. At lower levels in the plant/factory setup, networks provide higher reliability, visibility and diagnosability and enable capabilities such as distributed control, … Read more
-
The Role of IO-Link (Single Drop Communication Technology) in Industrial Networking
The increasing application of microcontrollers in low cost sensors and actuators has provided opportunities for adding diagnosis and configuration data to support increasing function requirements. The chief reason for the development of a new technology called IO-Link has been the … Read more
-
Features of Popular Fieldbuses used in Industrial Networking
The commonly used fieldbuses are: Ethernet TCP/IPModbusDeviceNetControlNetModbus TCPPROFIBUS-DPAS-I The Table below outlines the key features of popular Fieldbuses that are commonly used in Industrial Networking: … Read more
-
Types and Operations of Wired Ethernet Networks
Ethernet plays an important role as a communication platform for automation systems. The Key strength of Ethernet is in its ability to run many protocols simultaneously on the same network. Ethernet enables flexibility, scalability and performance of industrial networks … Read more
-
Basic Features of Controller Area Network (CAN)
Controller Area Network (CAN) is a serial communication protocol developed primarily for applications in the automotive industry. It is also capable of offering good performance in other time-critical industrial applications. The CAN protocol is optimized for short messages and uses … Read more