Three-Phase Diode Bridge Rectifier: Function & Operation

In many high-powered applications, three-phase voltages need to be rectified to give rise to a single DC supply; such rectification can be accomplished using an extension of the bridge rectifier such as the three-phase diode bridge rectifier.

Let’s consider the balanced three-phase circuit shown in Figure 1.0 below; the three-phase wye-connected source is connected to a resistive load by means of a three-phase transformer, with a delta-connected primary and a wye-connected secondary. The circuit may also operate without the transformer.

The three secondary currents i.e. i_a, i_b, and i_c, flow through pairs of diodes D₁ to D₆ in a way very similar to the single-phase rectifier. The diodes will conduct in pairs depending on the relative line voltages, according to the following sequence: D₁-D₂, D₂-D₃, D₃-D₄, D₄-D₅, D₅-D₆ and D₆-D₁.

The line-to-line voltage in a three-phase wye-connected source is √3 times the phase voltage. The instantaneous source voltages and the related diode conduction periods, in addition to the load voltage are shown in the Figure 1.1.

You may also read:

• How cycloconverter is used as a direct frequency converter
• The Diac Features & Applications
• Insulated Gate Bipolar Transistor (IGBT) – Structure, Operation & Applications
• Optothyristors: Features & Principle of Operation

Please follow us & share: